Value-adding integration – easy with the dacore LIMS
In the technical test lab, measuring equipment management ensures that all measuring equipment is used in accordance with all requirements. Specific software exists for measuring equipment management, but its range of functions is limited: conventional measuring equipment management programs do not record where and when the measuring equipment is used – this is where the advantages of integrated laboratory management come into play.
"Our integrated measuring equipment management reminds you of calibration dates, records maintenance and repair history and enables automated notification for measuring equipment monitoring," says Philipp Zinnkann from dacore, describing the key benefits of this solution.
A typical situation in day-to-day lab work shows this well: after a piece of measuring equipment has been repaired or recalibrated, the lab has to prove whether the equipment affected earlier measurements before the repair or calibration, for example through measurement errors. Conventional measuring equipment management cannot capture this. Lab staff would have to dig through old test reports to find and compile the relevant data.
With the integrated solution, by contrast, you can trace exactly where a piece of measuring equipment was used, what role it played in the measurement, how it was used and what results it delivered. Based on this traceable data, you can decide whether re-measurements are needed or a test report has to be recalled. In this area of Lab 4.0, too, traceability and integration are key to smooth processes.
Documentation takes less effort
As a by-product, day-to-day work in the test lab gets much easier: the integrated measuring equipment management documents which specific measuring equipment was used in tests for test reports – even on mobile devices. Here, the measuring equipment used can be recorded conveniently and quickly with a scanner. The combination and grouping of several pieces of measuring equipment in measuring chains and measuring stations is documented as well. This technical link to the measuring equipment in the test process creates a high level of transparency: you always know which measuring equipment is doing what and when, and the measurement results end up where they belong.
At the same time, the dacore LIMS does everything a classic measuring equipment management system does. It reminds you of calibration dates and records the maintenance and repair history of every device. Integrated measuring equipment management is also the basis for efficient measurement data management: after all, measuring equipment is the data source for a test. In the LIMS, this data is available consistently, traceably, and searchably, so it can be used directly.
More than just standard: advantages of the integrated LIMS
In the LIMS, measuring equipment management covers master data as well as test and calibration intervals. You can also define responsibilities for specific measuring equipment and assign them to people and standards. Dynamic processes such as lending, calibration, comparison tests, blocking, or functional restrictions are handled directly in the system. This makes the complete history of every piece of measuring equipment available at any time.
On this basis, you can run analyses at the push of a button across your entire inventory of measuring equipment, for example which measuring equipment is due for calibration next month. Measuring stations or measuring chains can be managed with their own calibration and validation, independently of the individual devices. Automated notification functions are also available for measuring equipment monitoring.
In the LIMS, you can assign measuring equipment directly to tests and, conversely, transfer measuring equipment data directly into test reports. All measuring equipment is available in the integrated scheduling and resource planning and can be assigned through a graphical interface. This lets you reserve measuring equipment and display tests as early as the quotation phase. Tests can just as easily be assigned to employees, resources, or individual items of measuring equipment. Whether in the planning or quotation phase, or right before and during the test – integrated measuring equipment management gives you access at any time to all objects linked together in the LIMS.
For the measuring equipment assigned to tests, the integrated LIMS can also carry calibration data and images over into test reports. The images can still be edited while the test report is being created. Measurement data and measurement curves can likewise be added directly to the tests.
Calibration data exchange according to VDI/VDE 2623
Measuring equipment must be calibrated or verified at defined intervals or before use in order to ensure traceability, including metrological traceability to standards, and to be able to trace sources of error and supply chains. An essential part of measuring equipment management is therefore the exchange of calibration data between the calibration lab and the test lab. It follows the VDI/VDE 2623 guideline and uses the XML format.
The integrated LIMS automatically handles placing the order, importing the data, transferring calibration data and records in the opposite direction, and automatically importing and assigning them to the relevant measuring equipment and tests. This makes every step immediately traceable and usable for quality assurance.
Measuring equipment and mobile applications
When a test uses mobile applications, integration makes working with them easier: there is no need to enter data afterward, because users can work in real time with the application in the LIMS.
dacore DBS has already implemented customer-specific solutions like this several times. They include assigning measuring equipment or measurement peripherals to tests by barcode scan, as well as assigning devices under test (DUTs) to tests or storage locations the same way. Activities currently in progress could be logged directly in the LIMS by scanning a DUT, a test, and a resource, then entering the activity, e.g., "Setup start", "Test start", and "Test end".
Photo documentation of the measurement setup and the condition of the device under test (DUT) before, during, and after the test becomes much easier. Various input options are available for querying and recording test status, from barcode scanning and keyboard entry to a freehand function. DUT logistics, including recording and tracking, are also supported. Barcode labels generated by the system are used here, but they also give users direct access to the measuring equipment history, including current condition, calibration history, the date of the next calibration, and the next planned use.
But mobile applications can do even more. Device under test (DUT) or test information can be recognized directly from image content, without a scan. DUTs can be tracked both locally and globally: with RFID tags, you can find DUTs quickly and reliably in large storage areas, even without prior check-in to storage and with dynamic space allocation. In transit, on the other hand, you can follow the position of DUTs at any time using GPS data.
Measuring equipment management, calibration intervals and test planning interlock in the TestLab Plus LIMS.